Oil & Gas

Roto-Jet 2200 Pump

Roto-Jet 2000 Series

Performance Criteria

  • Capacity to: 121.5 m3/hr
  • Head to: 1232 metres
  • Temperature to: 121 C
  • Viscosities to: 10 cps

Applications
Higher efficiency pump for moderate head applications. Available in material options of ductile iron and 316 stainless

Viking Abrasive Liquids Pump

Viking Abrasive Liquids Pump

Performance Criteria

  • Capacity: To 32 m³/hr
  • Pressure: To 10 bar
  • Temperature: To 220°C
  • Viscosities: To 17,000 cSt 

Applications
The abrasive liquid pump series has proven highly superior in pumping paints, inks and other abrasive liquids. With Tungsten Carbide bearings and Silicon Carbide mechanical seal, the pumps have doubled the life of standard gear pumps in abrasive applications

Kral CG Pump

Kral CG Series

Performance Criteria

  • Capacity: 15 to 3, 500 l/min
  • Pressure: To 100 bar
  • Temperature: -40°C to 180°C
  • Viscosities: To 10,000, 000 cps

Applications
The CG range is applied to deliver lubracating oil, non-abrasive fuel oil or other lubricating fluids. This range can be engineered to suit many applications with its vast array of options.

Kral CK Pump

Kral CK-CL Series

Performance Criteria

  • Capacity: 3 to 980 l/min
  • Pressure: To 100 bar
  • Temperature: -40°C to 180°C
  • Viscosities: To 10,000 cps

Applications
Lubrication oil pumps for gears, motors and turbines, industrial hydraulic, ship hydraulic, elevator hydraulic and machine building industry.

HMD CS High Temperature Pump

HMD CS High Temperature

Performance Criteria

  • Capacity: To 300 m³/hr
  • Head: To 120m
  • Temperature: To 450°C
  • Viscosities: To 200 cps

Applications
Ideally suited for thermal oil heating circuits where sealing of hot liquids is paramount to safety and performance.

Truflo DAP Series Cross Section

Truflo DAP ANSI

Performance Criteria

  • Capacity: To 1100 m³/hr
  • Head: To 140 metres
  • Temperature: To 371°C

Applications
Mining, chemical processing, textiles, pulp and paper, steel production, general industry

Kelair Hydrant Fire Pumps - Diesel

Kelair Diesel & Electric Hydrant Booster Pumps

Kelair offers fully-compliant AS2941, fully-packaged hydrant booster pumps complete will fully-valved suction and discharge manifolds and by-pass line. Packaged systems provide simple installation. All units are factory tested prior to delivery and are backed by Kelair’s field service technicians.

  • NFPA 20 & FM Approved Versions also avaible
  • Annubar test lines
  • Pressure-sustaining / relief valves
  • Onsite Commissioning
  • On Site Flow Tests
  • Automatic and manual jacking pumps
Truflo DSP Self Priming Pump Cross Section

Truflo DSP Self Priming

Performance Criteria

  • Capacity: To 230 m³/hr
  • Head: To 90 metres
  • Temperature: To 372°C

Applications
Sump services, tanker unloading

Kelair Fire Hose Reel & Jacking Pump

Kelair Fire Hose Reel & Jacking Pumps

These units boost water to fire hose reels as and when it is needed. Built to AS 2941 they are supplied as a complete package.

  • Compliance with AS2941 available
  • Galvanised base frame
  • Discharge isolating valve
  • Hydro-pneumatic pressure gauge
  • Suction check valve
  • Special two-way valve

Options:

  • Weatherproof units
  • Flow switch control
  • Integrated by-pass pipework and valves
  • Inching button

Kelair Fire Sprinkler Pumpsets

A complete range of fire sprinkler pumpsets for applications such as high-rise buildings, low-rise buildings, hospitals, mine sites, industrial factories and processing plants.
Units can be supplied to comply with the following standards:

  • AS2941/AS2118
  • NFPA20 and FM approved versions also available
  • ESFR and High-hazard systems
  • Fully-valved suction and discharge manifolds
  • Annubar test lines
  • Pressure sustaining / relief valves
  • Annubar jacking pumps
  • On-site commissioning

Sign up for the latest news

Call us today on 1300 789 466