Lowara FH Series Pump

Lowara FH Series Centrifugal Electric Pump

Performance Criteria

  • Capacity: To 3600 l/min
  • Head: To 95m
  • Temperature: To 120°C

Water circulation and transfer in civil, industrial and agricultural sectors, pressure boosting, water supply, circulation of hot and cold water in heating and conditioning systems, industrial washing

Kelair Fire Hose Reel & Jacking Pump

Kelair Fire Hose Reel & Jacking Pumps

These units boost water to fire hose reels as and when it is needed. Built to AS 2941 they are supplied as a complete package.

  • Compliance with AS2941 available
  • Galvanised base frame
  • Discharge isolating valve
  • Hydro-pneumatic pressure gauge
  • Suction check valve
  • Special two-way valve


  • Weatherproof units
  • Flow switch control
  • Integrated by-pass pipework and valves
  • Inching button

Kelair Fire Sprinkler Pumpsets

A complete range of fire sprinkler pumpsets for applications such as high-rise buildings, low-rise buildings, hospitals, mine sites, industrial factories and processing plants.
Units can be supplied to comply with the following standards:

  • AS2941/AS2118
  • NFPA20 and FM approved versions also available
  • ESFR and High-hazard systems
  • Fully-valved suction and discharge manifolds
  • Annubar test lines
  • Pressure sustaining / relief valves
  • Annubar jacking pumps
  • On-site commissioning
Viking General Purpose Gear Pump

Viking General Purpose Series Gear Pump

Performance Criteria

  • Capacity: To 103 m³/hr
  • Pressure: To 7 bar
  • Temperature: -50°C to 230°C
  • Viscosities: To 55,000 cSt 

Designed for medium duty applications at low cost. Excellent for diesel fuel and oil lube transfer applications

Goulds GISO Series Pumps

Goulds GIS Series End Suction Pumps

Performance Criteria

  • Capacity: To 900 m³/hr
  • Head: To 160m
  • Temperature: 18°C to 140°C

Single stage end suction pumps available in both long coupled and close coupled versions. Standard version is available with cast iron casings, Zn free bronze impellers and 420 stainless shafts. Also available in ductile iron, 316 stainless, duples stainless and CD4MCu

HMD Heavy Duty Standard GSA Frame 0

HMD GSA Heavy Duty Standard

Performance Criteria

  • Capacity: To 305 m³/hr
  • Head: To 140m
  • Temperature: To 260°C
  • Viscosities: To 200 cps

ANSI B73.3M Standard.  Particularly suited to the toxic, aggressive and carcinogenic liquids such as Titanium Tetrachloride, Methanol, Benzene, Phenol, TDI and Vinyl Chloride Monomer.

HMD GSSP Self Priming Pump

HMD GSSP Self Priming

Performance Criteria

  • Capacity: To 25 m³/hr
  • Head: To 52m
  • Temperature: To 260°C
  • Viscosities: To 200 cps

Ideal for road tanker unloading with the elimination of the ingress of air into suction line thus faster self-priming is ensured.

HMD General Transfer Pump

HMD GT General Transfer

Performance Criteria

  • Capacity: To 30 m³/hr
  • Head: To 40m
  • Temperature: To 260°C
  • Viscosities: To 200 cps

The GT range has been designed as a compact, cost-effective and minimum maintenance sealless pump for general chemical tank transfer and road tanker. unloading applications.

Viking High Speed Compact Pump

Viking High Speed Compact Series

Performance Criteria

  • Capacity: To 132 m³/hr
  • Pressure: To 17 bar
  • Temperature: -30°C to 180°C
  • Viscosities: To 3,300 cSt 

Compact, motor-speed pumps for medium to heavy duty applications. Also suitable for thin liquids. Designed specifically for direct drive with 1450, 950 and 720 rpm electric motors. Excellent for diesel transfer, oil lube and oil recirculation systems.

Albin Hoses

Albin Hoses

  • Use the best available quality rubber to have the best abrasion resistance
  • Vulcanized with a 0.5 mm tolerance on their wall thickness
  • Same quality rubber for the entire thickness of the hose decreasing the chance of delaminating between the reinforced lays
  • Hoses are available in 7 materials: NR, NBR, EPDM, Hypalon, FKM, NR food grade, NBR food grade
  • Available to fit Bredel, Verdeflex, King Cobra (Blackmer), and other brands of hose pumps


Corken Industrial Vane Pump Cross Section

Corken Industrial Vane

Performance Criteria

  • Capacity: To 91 m³/hr
  • Pressure: To 8.5 bar
  • Temperature: To 107°C
  • Viscosities: To 4, 250 cps

Designed for applications involving alcohols, solvents, freons, acetone, fuel oils, light oils and other thin liquids. Ideal for chemical processing, petroleum and other industries.

Pulsafeeder Isochem Pump

Pulsafeeder ISOCHEM Sealless

Performance Criteria

  • Capacity: To 10 m³/hr
  • Pressure: To 6.9 bar
  • Temperature: To 232°C
  • Viscosities: To 100,000 cps

Ideal for vacuum service and transfer of expensive, hazardous and/or corrosive chemicals.  The sealless feature makes the pumps perfect for environments subject to strict legislation

Sign up for the latest news

Call us today on 1300 789 466