ABEL Pumps CM Compact Membrane Diaphragm Pump

Performance Data

• Capacity: 500 l/min or 30 m³/h
• Pressure: 25 Bar

Applications

Mine Dewatering, thickener underflow, sludge/fluid transfer, filter press feed, gland seal water, spray dryer feed, rotary kiln feed.

HMD CS High Temperature

Performance Criteria

• Capacity: To 300 m³/hr
• Head: To 120m
• Temperature: To 450°C
• Viscosities: To 200 cps

Applications
Ideally suited for thermal oil heating circuits where sealing of hot liquids is paramount to safety and performance.

Kelair Diesel & Electric Hydrant Booster Pumps

Kelair offers fully-compliant AS2941, fully-packaged hydrant booster pumps complete will fully-valved suction and discharge manifolds and by-pass line. Packaged systems provide simple installation. All units are factory tested prior to delivery and are backed by Kelair’s field service technicians.

• NFPA 20 & FM Approved Versions also avaible
• Annubar test lines
• Pressure-sustaining / relief valves
• Onsite Commissioning
• On Site Flow Tests
• Automatic and manual jacking pumps

Viking Electrically Heated Series

Performance Criteria:

• Capacity: To 2580 l/min
• Pressure: To 14 bar
• Temperature: 232°C
• Viscosities: To 440,000 cSt
• Sizes: 1.5" to 5"

Applications:
Precise temperature control with built-in electric heat cartridges which minimizes energy use and heat

Abel Pumps EM Electric Diaphragm Pump

Performance Data

• Capacity: 1000 l/min or 60 m³/h
• Pressure: 6 Bar

Applications

Mine Dewatering, thickener underflow, sludge/fluid transfer, filter press feed, rotary kiln feed.

Kelair Fire Hose Reel & Jacking Pumps

These units boost water to fire hose reels as and when it is needed. Built to AS 2941 they are supplied as a complete package.

• Compliance with AS2941 available
• Galvanised base frame
• Discharge isolating valve
• Hydro-pneumatic pressure gauge
• Suction check valve
• Special two-way valve

Options:

• Weatherproof units
• Flow switch control
• Integrated by-pass pipework and valves
• Inching button

Kelair Fire Sprinkler Pumpsets

A complete range of fire sprinkler pumpsets for applications such as high-rise buildings, low-rise buildings, hospitals, mine sites, industrial factories and processing plants.
Units can be supplied to comply with the following standards:

• AS2941/AS2118
• NFPA20 and FM approved versions also available
• ESFR and High-hazard systems
• Fully-valved suction and discharge manifolds
• Annubar test lines
• Pressure sustaining / relief valves
• Annubar jacking pumps
• On-site commissioning

Viking General Purpose Series Gear Pump

Performance Criteria

• Capacity: To 103 m³/hr
• Pressure: To 7 bar
• Temperature: -50°C to 230°C
• Viscosities: To 55,000 cSt

Applications
Designed for medium duty applications at low cost. Excellent for diesel fuel and oil lube transfer applications

Goulds GIS Series End Suction Pumps

Performance Criteria

• Capacity: To 900 m³/hr
• Head: To 160m
• Temperature: 18°C to 140°C

Applications
Single stage end suction pumps available in both long coupled and close coupled versions. Standard version is available with cast iron casings, Zn free bronze impellers and 420 stainless shafts. Also available in ductile iron, 316 stainless, duples stainless and CD4MCu

HMD GSA Heavy Duty Standard

Performance Criteria

• Capacity: To 305 m³/hr
• Head: To 140m
• Temperature: To 260°C
• Viscosities: To 200 cps

Applications
ANSI B73.3M Standard. Particularly suited to the toxic, aggressive and carcinogenic liquids such as Titanium Tetrachloride, Methanol, Benzene, Phenol, TDI and Vinyl Chloride Monomer.

Goulds GSC Series Split Casing Pumps

Performance Criteria

• Capacity: To 889 l/min
• Pressure: To 8.6 bar
• Temperature: To 150°C
• Viscosities: To 25,000 cps
• Sizes: ¼” to 3”

Applications
Fully-bolted metallic pump in either Aluminium, Cast Iron, 316 Stainless Steel, or Alloy C. Pump designed to guarantee Non-Stalling and comes with 5-year limited warranty, ensuring performance and reliability

HMD GSSP Self Priming

Performance Criteria

• Capacity: To 25 m³/hr
• Head: To 52m
• Temperature: To 260°C
• Viscosities: To 200 cps

Applications
Ideal for road tanker unloading with the elimination of the ingress of air into suction line thus faster self-priming is ensured.