Viking General Purpose Series Gear Pump

Performance Criteria

• Capacity: To 103 m³/hr
• Pressure: To 7 bar
• Temperature: -50°C to 230°C
• Viscosities: To 55,000 cSt

Applications
Designed for medium duty applications at low cost. Excellent for diesel fuel and oil lube transfer applications

Goulds GIS Series End Suction Pumps

Performance Criteria

• Capacity: To 900 m³/hr
• Head: To 160m
• Temperature: 18°C to 140°C

Applications
Single stage end suction pumps available in both long coupled and close coupled versions. Standard version is available with cast iron casings, Zn free bronze impellers and 420 stainless shafts. Also available in ductile iron, 316 stainless, duples stainless and CD4MCu

Micropump GJ Series

Performance Data

• Maximum flow rate (at 5500 RPM): 6.8 L/min
• Differential pressure (max): 5.5 Bar (80 psi)
• System pressure (max): 21 Bar (300 psi)

Applications

• Analytical equipment
• Fuel cell technology
• Pulp & paper bleaching

Micropump GJR Series

Performance Data

• Flow rate (at 4000 RPM): 4.92 L/min
• Differential pressure (max): 5.5 Bar (80 psi)
• System pressure (max): 21 Bar (300 psi)

Applications

• Severe duty

Micropump GLH Series

Performance Data

• Maximum flow rate (at 3450 RPM): 26.6 L/min
• Differential pressure (max): 8.6 Bar (125 psi)
• System pressure (max): 103 Bar (1500 psi)

Applications

• Chemical addition/injection
• Petroleum pilot plant distribution
• Wastewater treatment
• Mechanical seal flush
• Medical diagnostic equipment
• Chemical addition/injection

HMD GSA Heavy Duty Standard

Performance Criteria

• Capacity: To 305 m³/hr
• Head: To 140m
• Temperature: To 260°C
• Viscosities: To 200 cps

Applications
ANSI B73.3M Standard. Particularly suited to the toxic, aggressive and carcinogenic liquids such as Titanium Tetrachloride, Methanol, Benzene, Phenol, TDI and Vinyl Chloride Monomer.

HMD GSSP Self Priming

Performance Criteria

• Capacity: To 25 m³/hr
• Head: To 52m
• Temperature: To 260°C
• Viscosities: To 200 cps

Applications
Ideal for road tanker unloading with the elimination of the ingress of air into suction line thus faster self-priming is ensured.

HMD GT General Transfer

Performance Criteria

• Capacity: To 30 m³/hr
• Head: To 40m
• Temperature: To 260°C
• Viscosities: To 200 cps

Applications
The GT range has been designed as a compact, cost-effective and minimum maintenance sealless pump for general chemical tank transfer and road tanker. unloading applications.

Viking High Speed Compact Series

Performance Criteria

• Capacity: To 132 m³/hr
• Pressure: To 17 bar
• Temperature: -30°C to 180°C
• Viscosities: To 3,300 cSt

Applications
Compact, motor-speed internal gear pumps for medium to heavy duty applications. Also suitable for thin liquids. Designed specifically for direct drive with 1450, 950 and 720 rpm electric motors. Excellent for diesel transfer, oil lube and oil recirculation systems.

ABEL Pumps HM Duplex Piston Diaphragm Pump

Performance Data

• Capacity: 1500 l/min or 90 m³/h
• Pressure: 100 Bar

Applications

Mine dewatering, Thickener underflow, Sludge/Fluid transfer, Autoclave feed, Filter Press feed, Gland Seal water, Spray Dryer feed, Rotary Kiln feed.

Abel Pumps HMQ Quadruplex Piston Diaphragm Pump

Performance Criteria

• Capacity: 7500 l/min or 440 m³/h
• Pressure: 230 Bar

Applications

Mine Dewatering, Thickener Underflow, Backfilling, Sludge/Fluid Transfer, Autoclave Feed, Filter Press Feed.

Albin Hoses

• Use the best available quality rubber to have the best abrasion resistance
• Vulcanized with a 0.5 mm tolerance on their wall thickness
• Same quality rubber for the entire thickness of the hose decreasing the chance of delaminating between the reinforced lays
• Hoses are available in 7 materials: NR, NBR, EPDM, Hypalon, FKM, NR food grade, NBR food grade
• Available to fit Bredel, Verdeflex, King Cobra (Blackmer), and other brands of hose pumps